ABS: ABS is made of acrylonitrile, styrene and butadiene, which is a very hard material. It is light in weight and it can withstand impact and UV (ultraviolet radiation); in addition to this，ABS has excellent elasticity and it is flexibility, it reacts well with glue and paint well, it can work normally at all temperatures and provides a variety colors
1.Customer provides the 3D drawings or product’s sample. Vacuum forming is one of the common methods of processing plastic materials. From the beginning, we prefer you provide us the 3D drawings or samples of your products. STP, STEP or IGS are the first choices. Of course, DITAI has a professional designer and engineer, if you wish, we can help you
Blister products have applications in many aspects. What are the general conditions for the quality of plastic products? 1.Pulling line: Some undesired line protrusions (not found in the mold) produced during the production of plastic molding, need to re-modify the mold (reduced height and increase the degree of smoothness) and add additional pressure mold (we call it the upper mold)
1.What is vacuum forming?Vacuum forming is one of the common methods of processing plastic materials. The main principle is that the flat plastic hard sheet is softened by heating, adsorbed on the surface of the mold by vacuum, and formed after cooling. Vacuum forming originates from the 1930s and yet it remains increasingly relevant today. This process is a simplified
Plastic products can be found everywhere in our lives, and in some ways, humans can’t live without plastic. Similarly, in the process of vacuum forming production, plastic has an important position.Plastic is the basic material. Without these basic materials, we would not be able to produce a lots of products in our life. This shows that plastics have a wide
In the previous article we have briefly introduced a few plastic processing methods, now I would like to introduce more plastic processing methods. Injection Molding- The injection molding machine uses the nature of molten plastic to melt into liquid after heating to a specified temperature, injecting the molten liquid into the closed cavity with high pressure, cooling and shaping, then opening the mold and
Last time I introduced the spraying process, I hope it can help you understand the spraying process after reading the previous article.This time I would like to introduce the application of cutting. When the vacuum forming process is finished, the product need to be processed again because of the edge scrap.We use cutting to remove these scrap. Different products need different cutting methods.
The previous articles introduced the thermoforming process, after reading them, I believe you have an understanding of this process. But this time I will introduce the spray paint process. Spray paint is a surface treatment that covers products and semi-finished products. Spray paint has a certain protective effect on plastic products. In addition, plastic products after spray paint will be brighter and better looking, and
In the past 2 months I was working so hard on improving and upgrading our workhouse and office. The motivation of what I was doing is mainly for the idea of providing better working environment for colleagues, better service for clients and products’ quality specially. Specifically, in order to accomplish the idea, so far, I had expended, redecorated and reorganized Vacuum Forming Department: With
Learn about the main advantages and disadvantages of plastic molding processes for vacuum forming and injection molding to facilitate your purchasing plan.
Do you need samples for quality reference? Leave a message to tell us the details!
